Enhanced anaerobic biodegradability and inactivation of fecal coliforms and Salmonella spp. in wastewater sludge by using microwaves.

During continuous operation of three mesophilic-anaerobic digesters, the effect of microwave irradiation, as sludge thermal pretreatment (60 to 65 degrees C), was studied. The fecal coliforms log inactivation for microwaved/digested sludge was 4.2 +/- 0.4, whereas for conventionally heated/digested sludge and control were 2.9 +/- 0.5 and 1.5 +/- 0.5, respectively. In the case of Salmonella spp., no colonies were detected in 85% of the microwaved/digested samples. Considering the detection limit, the log inactivation of these samples was greater than 2.0 +/- 0.3. The conventionally heated/digested sludge and control showed log inactivations of 1.9 +/- 0.2 and 1.1 +/- 0.3, respectively. At the 95% confidence level, microwaved/digested sludge increased the biogas production by 16.4 +/- 5.6% and 6.3 +/- 2.4%, as compared to control and conventionally heated/digested sludge, respectively. When thermally treated sludge was analyzed for soluble chemical oxygen demand, microwaved waste-activated sludge showed considerable solubilization between 37 and 60 degrees C. Microwaved/digested sludge showed a reduction of capillary suction times by 11.1 +/- 5.9% and 10.7 +/- 5.6%, as compared to control and conventionally heated/digested sludge, respectively.     

Study on the formation and transport of ozone in relation to the air quality management and vegetation protection in Tenerife (Canary Islands)

An experimental study on the formation and transport of ozone in ambient air was performed in Tenerife (Canary Islands) in order to investigate the processes affecting ozone levels and air quality. The special features of Tenerife (prevalence of the trade wind pattern (NE), orography and the specific location of the local ozone sources) permit to quantify the role of the ‘long-range transport from northern latitudes' versus the ‘formation and transport of ozone downwind of the main urban areas' of Tenerife. Levels of O₃, NO₂ and O_X were monitored in different types of environments to achieve this purpose. The results showed that: (1) upwind of the urban areas ozone is mainly transported from the ocean by trade winds, (2) local ozone titration (by NO) and ozone replenishment from the ocean are the main causes of ozone variations in urban and suburban areas, and (3) photochemical ozone production occurs downwind of the urban areas. Photochemical production causes daylight O₃ and O_X levels downwind of urban areas to be frequently (60% and 35% days/year, respectively) higher than upwind of the urban sites (O₃ and O_X excess frequently in the range 5–20 ppbv). Due to the above processes, different daily ozone cycles occur in short distances (<30 km), with maximum O₃ levels during daylight or night depending on the site. Ozone phytotoxicity was assessed by calculating the AOT40 index upwind and downwind of the main urban areas. The critical value for the 5-day-AOT40 index was simultaneously exceeded at the two sites (few times/year) during long-range transport events. During the additional exceedances of the critical value downwind of the urban area, relatively high 5-day-AOT40 values were recorded upwind of the urban site. Thus, long-range transport from northern latitudes may produce relatively high 5-days-AOT40 levels in the oceanic boundary layer. These results are important for the protection of the large number of endemic plants in the Canaries. The conceptual model discussed in this study may be qualitatively applied to other islands which possess features similar to those of Tenerife.     

Patterns of animal diversity in different forms of tree cover in agricultural landscapes.

As tropical regions are converted to agriculture, conservation of biodiversity will depend not only on the maintenance of protected forest areas, but also on the scope for conservation within the agricultural matrix in which they are embedded. Tree cover typically retained in agricultural landscapes in the neotropics may provide resources and habitats for animals, but little is known about the extent to which it contributes to conservation of animal species. Here, we explore the animal diversity associated with different forms of tree cover for birds, bats, butterflies, and dung beetles in a pastoral landscape in Nicaragua. We measured species richness and abundance of these four animal taxa in riparian and secondary forest, forest fallows, live fences, and pastures with high and low tree cover. We recorded over 20,000 individuals of 189 species including 14 endangered bird species. Mean abundance and species richness of birds and bats, but not dung beetles or butterflies, were significantly different among forms of tree cover. Species richness of bats and birds was positively correlated with tree species richness. While the greatest numbers of bird species were associated with riparian and secondary forest, forest fallows, and pastures with >15% tree cover, the greatest numbers of bat species were found in live fences and riparian forest. Species assemblages of all animal taxa were different among tree cover types, so that maintaining a diversity of forms of tree cover led to conservation of more animal species in the landscape as a whole. Overall, the findings indicate that retaining tree cover within agricultural landscapes can help conserve animal diversity, but that conservation efforts need to target forms of tree cover that conserve the taxa that are of interest locally. Preventing the degradation of remaining forest fragments is a priority, but encouraging farmers to maintain tree cover in pastures and along boundaries may also make an important contribution to animal conservation.     

Atmospheric particulate matter and air quality in the Mediterranean: a review

This article synthesises the results obtained in several projects on atmospheric aerosol (particulate matter – PM) pollution developed during the last years in the Western Mediterranean. It focuses on particulate matter sources and the strategies for suitable monitoring in ambient air. The article has been structured in several sections that give response to the main questions that prompted these studies. After analysing the main PM features in the Mediterranean, a brief review of the main factors differentiating the particulate matter composition with respect to Central Europe is presented. Finally, the suitability of the different metrics or parameters for monitoring ambient air PM levels in different types of environments is discussed. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic (www.research.plymouth.ac.uk/ace).     

Determining C/N ratios for typical organic wastes using biodegradable fractions

It is well established that an optimal aerobic and anaerobic microbial metabolism is achieved with a C/N ratio between 20 and 30. Most studies are currently based on chemically-measured carbon and nitrogen contents. However, some organic wastes can be composed of recalcitrant carbon fractions that are not bioavailable. To know the biodegradable C/N ratio, two different methods to determine the aerobic and anaerobic biodegradable organic carbon (BOC_AE and BOC_AN) are proposed and used to analyze a wide variety of different organic samples. In general, raw wastes and digested products have more amount of BOC_AE. On the contrast, the samples collected after an aerobic treatment have higher content of BOC_AN. In any case, all the BOC fractions are lower than the total organic carbon (TOC). Therefore, the C/N ratios based on BOC are always lower than the total C/N ratio based on the TOC measure. The knowledge of the real bioavailable C/N ratio is crucial for the biological treatments of organic materials. To reduce the test time necessary for BOC determination, the values of BOC for all the samples obtained at different times were compared and correlated with the final BOC. A method that allows for the determination of BOC_AE in 4 d is proposed. In relation to the anaerobic assay, the biogas potential calculated after 21 and 50 d was positively correlated with the final potential defined after 100 d of assay.     

Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.     

Fullerenes toxicity and electronic properties

Nanotechnology globally represents a new direction within scientific development, where the atomic and electronic properties of molecules are used in a unique fashion to produce and construct new and exotic materials and products. Fullerenes (Bucky balls, C₆₀) constitute a particular group within the field of nanotechnology. Fullerenes find applications in medicine, industrial chemistry and electronics. However, there are several unanswered questions about fullerenes and their toxicological properties. Most toxicological studies on fullerenes evolve around the in vitro and in vivo aspects of pristine C₆₀ along with chemically modified C₆₀ molecules. We reviewed toxicology reports on C₆₀. We bring a critical and challenging evaluation of the electronic and quantum properties of C₆₀ molecules in context with the implications on cellular factors and metabolites. The evaluation shows that the reactivity and quantum chemical properties of C₆₀ can have unexpected effects in the cell, by principally absorbing metabolites, such as OH^? and H⁺ ions and alter its reactivity. We thus challenge the present view of C₆₀ solely based on empirical studies, based on the electronic properties of C₆₀ that vary considerably with their size and reaction path. A further example of this is the absorption of divalent zinc ions, which shows an increase in reactivity of the C₆₀ that presents an important pattern of chemical state, reactivity and toxicological potential. The results evaluate the toxicological potential of C₆₀ from a different angle than conventional, by applying a blend of critical review of the findings on C₆₀ toxicity, their chemical and electronic properties.     

Energy and land use in worldwide agriculture: an application of life cycle energy and cluster analysis

Agriculture is expected to provide food in a sustainable manner while also partially contributing to the energy problem as well as to bio-material supply. Moreover, fossil fuels scarcity calls for an increase of energy efficiency in agricultural processes. This study evaluates patterns, trends, driving factors and trade-offs of energy use in selected agricultural systems and aims at grouping them into clusters with similar energy and social performances. Results show that in 2010 the highest power densities and energy intensities of production are found by crop sector of cluster 5 (China: 59.19 GJ/ha, 15.29 MJ/kg dm) and cluster 3 (Japan: 50.11 GJ/ha, 12.32 MJ/kg dm) as well as by livestock sector of cluster 3 (Japan: 328.47 GJ/ha, 103.08 MJ/kg dm), while the lowest values in clusters 2 and 4, including selected developing countries and USA. Cluster 3 (Japan) also shows the lowest energy intensity of economic value of crops (2.75 MJ/$), while cluster 5 (China) the highest one (23.96 MJ/$). Cluster analysis also sheds light on trends, identifying two groups: cluster 1*, gathering most European countries, USA and Japan, characterized by a decreasing trend of all energy indicators; and cluster 2*, including developing countries, the Netherlands and Spain, characterized by an increasing trend of indicators. Results highlight the importance of an integrated framework for evaluating energy use as well as of a multi-criteria approach to understand the trade-offs and interplay of performance indicators.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

Five years of formaldehyde and acetaldehyde monitoring in the Rio de Janeiro downtown area – Brazil

The fuel matrix used in Brazil is unique around the world. The intensive use of hydrated ethanol, gasohol (gasoline with 25% v/v of ethanol), compressed natural gas (CNG), and biodiesel leads to a peculiar composition of the urban atmosphere. From 1998 to 2002 an increase in formaldehyde levels was observed and since then, a reduction. This work presents a monitoring campaign that was executed from March 2004 to February 2009 by sampling at early morning on every sunny Wednesday for a total of 183 samples. The results indicate a strong reduction in formaldehyde levels from 2004 (average of 135.8 μg m^?3 with SD 28.4 μg m^?3) to 2009 (average of 49.3 μg m^?3 with SD 27.4 μg m^?3). The levels of acetaldehyde showed a slight reduction from 2004 (average of 34.9 μg m^?3 with SD 8.0 μg m^?3) to 2009 (average of 26.8 μg m^?3 with SD 11.5 μg m^?3). Comparing the results with the concurrent evolution of the fleet and of fuel composition indicates that the observed formaldehyde levels could be associated with the increase in ethanol use and in CNG use by engines with improved technology over the first converted CNG engines. Modelling studies using the OZIPR trajectory model and the SAPRC chemical mechanism indicate that formaldehyde is the main ozone precursor in Rio de Janeiro and acetaldehyde is the forth one.